Adding Ip Cameras - Cisco Wireless Service Module 2 Getting Started Manual

Configuring VSM
Step 7
Step 8

Adding IP Cameras

Step 1
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
3-26
Figure 3-39 Quality Slider
Click the Submit button to add the analog camera.
Repeat Step 4 through
Adding IP cameras is the process of configuring information about the IP cameras
that will operate in your VSM deployment. This information includes the name of
the camera, information about its video stream, and its log in credentials.
IP cameras (also called network cameras) connect directly to an IP network and
do not require separate encoders.
If you will not use IP cameras, skip this section.
Procedure
Access the VSOM Operations Manager as described in the
Surveillance Operations Manager" section on page 3-5
Step 7 as needed to add other cameras.
Chapter 3 Configuring VSM
"Accessing Video
OL-19733-01