Ip Address Settings; Minimum System Requirements; Logging On To The Camera - Cisco 5010 Quick Start Manual

IP Address Settings

If the camera is connected to a Dynamic Host Configuration Protocol (DHCP) network and DHCP is set to the On position,
the server will automatically assign an IP address to the device; DHCP On is the default setting for the camera. Set DHCP to
the Off position to set the camera's IP address manually.
NOTES:
• If the camera is not connected to a DHCP server but DHCP is set to On, the default IP address 192.168.0.20 on subnet
mask 255.255.255.0 is automatically assigned to the camera. After the first camera is connected and assigned the default
IP address, the system will automatically look for other cameras on the auto IP address system and assign IP addresses in
sequential order as required.
For example, if three cameras are connected to a network without a DHCP server, the first camera is assigned address
192.168.0.20, the second camera is assigned address 192.168.0.21, and the third camera is assigned address 192.168.0.22.
• Contact your network administrator to avoid network conflicts before setting/changing the camera's IP address.

Minimum System Requirements

™
Processor: Intel Core 2 Duo microprocessor, 2.6 GHz
Operating System: Windows XP
Memory: 2 GB RAM
Network Interface Card: 100 megabits (or greater)
Monitor: Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
Web Browser: Internet Explorer 8.0
Media Player: QuickTime 7.6.5 for Windows XP
This product is not compatible with QuickTime version 7.6.4 for Windows XP. If you have this version installed on
Note
your PC, you will need to upgrade to QuickTime version 7.6.5.

Logging On to the Camera

Open the Web browser.
Step 1
Type the camera's IP address in the browser address bar.
Step 2
Click the Login button in the navigation bar; a dialog box appears.
Step 3
Step 4 Type your user ID and password; admin is the default for both.
If this is the first time you are logging on to the camera as the administrator, the default User ID and Password
Note
are admin (all lowercase). For security purposes, be sure to change the password after you log on for the first
time.
Step 5 Click Log In.
9