KEEP WARM DRAWER
Operating the keep warm drawer
The purpose of the keep warm drawer is to keep hot
cooked foods at serving temperatures. It is not
recommended to heat cold food in the keep warm drawer;
always start with hot food.
The keep warm drawer may also be used to warm dinner
plates. All food placed in the keep warm drawer should be
covered with a lid or aluminum foil to maintain quality.
• Storage in or on appliance—flammable materials
should not be stored in an oven, warmer
drawer, near surface units. This includes paper,
plastic and cloth items, such as cookbooks,
plasticware and towels, as well as flammable liquids.
Do not store explosives, such as aerosol cans, on or
near the range.
• DO NOT LEAVE CHILDREN ALONE —children
should not be left alone or unattended in the
area where appliance is in use. They should never
be allowed to sit or stand on any part of the appliance,
including the warmer drawer.
Always use potholders or oven mitts when removing
food from the warmer drawer as cookware and plates
will be hot and you can be burned.
Do not use plastic wrap to cover food. Plastic may
melt onto the drawer and be very difficult to clean
up. Use only utensils and cookware recommended by the
manufacturer for use in the keep warm drawer.
Keep warm drawer indicator light
The keep warm drawer indicator light is located beside the
on-off key (See Fig. 1). It turns on when the keep warm
drawer is turned ON, and stays on until the keep warm
drawer is turned OFF.
Operating keep warm drawer
The electronic control located on the left side of the control
panel is used to turn ON and set temperature settings for
the keep warm drawer. Available temperature settings are
approximate, and are designated by hi, med, and lo (See
Fig. 2). If needed, refer to keep warm drawer
recommended food settings provided in this section.
To set the keep warm drawer:
1. Arrange the keep warm drawer rack
(if needed) in the keep warm drawer
and place the food or dishes in the
keep warm drawer.
2. Press on/off
The keep warm indicator light will
turn ON (See Fig. 1).
3. Press temp to choose desired
temperature setting (high, medium
or low-See Fig. 2).
4. Once warming is finished,
press on/off to turn OFF.
Keep warm drawer