Kenmore 417.4194 Series Installation Instructions Manual
Kenmore 417.4194 Series Installation Instructions Manual

Kenmore 417.4194 Series Installation Instructions Manual

Compact condensing dryer
Hide thumbs Also See for 417.4194 Series:

Advertisement

Quick Links

Installation Instructions
Instrucciones de Instalación
English / Español
Models/Modelos: 417.4194*
Kenmore
®
Compact Condensing Dryer
Condensación Secadora Compacto
* = Color number, número de color
P/N: 13938011 (1809)
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Kenmore 417.4194 Series

  • Page 1 Installation Instructions Instrucciones de Instalación English / Español Models/Modelos: 417.4194* Kenmore ® Compact Condensing Dryer Condensación Secadora Compacto * = Color number, número de color P/N: 13938011 (1809) Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com...
  • Page 2 Important Safety Instructions Table of contents WARNING Important Safety Instructions ....2-3 Installation Requirements .......4-7 Please read all instructions before using this Installation Instructions ......8-11 appliance. Accessories ..........12 Recognize safety symbols, words and labels Safety items throughout this manual are labeled with a WARNING or CAUTION based on the risk type as described below: Definitions IMPORTANT...
  • Page 3: Important Safety Instructions

    Important Safety Instructions WARNING For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or loss of life. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • Page 4: Installation Requirements

    Installation Requirements Tools and materials needed for installation: Optional Adjustable Phillips 3 or 4-wire universal pliers screwdriver Carpenter’s level 240 volt cord kit wrench INSTALLATION CHECKLIST Door Reversal Unpacking ‰ Follow detailed instructions in this guide ‰ Plastic fi lm (lining drum interior) is ‰...
  • Page 5: Installation Requirements

    Installation Requirements Electrical requirements for electric 4-WIRE POWER SUPPLY CORD KIT (not supplied) dryer 4-wire receptacle NOTE (NEMA type 14-30R) Because of potentially inconsistent volt- The dryer MUST employ a 4-conductor age capabilities, the use of this dryer with power supply cord NEMA 14-30 type SRDT power created by gas powered generators, or ST (as required) rated at 240 volt AC solar powered generators, wind powered...
  • Page 6: Clearance Requirements

    Installation Requirements Manufactured or mobile home Closet installation installation If installing the dryer in a closet, the unit must only be operated with the closet door Installation MUST conform to current in the open position to allow correct air Manufactured Home Construction & Safety circulation.
  • Page 7 Installation Requirements Dryer dimensions 43" (109 cm) to clear open door 24" (61 cm) 24" (60.5 cm) to front of closed door electrical supply on rear of unit 33.5" (85 cm) freestand dryer on floor floor line 43"(109 cm) to clear open door 26"...
  • Page 8: Installation Instructions

    Installation Instructions For a grounded, cord-connected dryer: Electrical installation The following are specific requirements for 1. The dryer MUST be grounded. In the proper and safe electrical installation of your event of a malfunction or breakdown, dryer. Failure to follow these instructions can grounding will reduce the risk of create electrical shock and/or a fire hazard.
  • Page 9 Installation Instructions 3. DO NOT modify the plug you’ve 3. Using an UNPLUGGED, UL-approved, installed on this appliance. If it will 30 amp. power cord, NEMA 10-30 type not fit the outlet, have a proper outlet SRDT, attach the neutral (center wire) installed by a qualified electrician.
  • Page 10 Installation Instructions NOTE WARNING Terminal screws were shipped from the ELECTRICAL SHOCK HAZARD factory temporarily attached inside the Do not operate dryer without terminal access cover. cover in place. A correctly installed termi- nal block cover also acts a qualified strain Terminal cover relief for the power cord.
  • Page 11 Installation Instructions Direct drain kit (on some models) 5. Move the internal dryer harness ground (WHITE) wire to the terminal block If your model included a direct drain kit, you and attach it AND the neutral (WHITE) may follow the instructions below to install power cord wire conductor to the center, it on your dryer for convenient drainage of SILVER colored terminal on the terminal...
  • Page 12 Installation Instructions 7. To route the drain tube to the right of the 4. Retrieve the clear tubing that came in the dryer, route the tube across the back of kit and install it also onto the elbow. the dryer and snap it into the “C” clips shown as below.
  • Page 13 Installation Instructions General installation IMPORTANT 1. Use a carpenter’s level to level your dryer Be sure the power is off at a circuit break- front-to-back and side-to-side. er/fuse box before plugging the power cord into an outlet. 4. Plug the power cord into a grounded outlet.
  • Page 14: Reversing The Door

    Reversing the Door 1. Protect flat work surface, such as top 6. Release the door switch striker and move of dryer or floor near dryer, with a soft it to the opposite location and reinstall. cloth or towel. Set the inner door ring aside. 2.
  • Page 15 Reversing the Door 10. Rotate inner lens 180° and place back 14. Rotate the plastic latch cover 180° and into door assembly. snap it in place around the door latch. 15. While supporting the door, install the 2 hinge mounting screws removed in first 11.
  • Page 16: Accessories

    Accessories DIRECT DRAIN KIT CAUTION P/N DK11 Depending on the model you purchased, Failure to use accessories manufactured by a direct draining kit for your condensing (or approved by) the manufacturer could dryer’s water collection system may have result in personal injury, property damage or been included in the initial purchase of damage to the washer.
  • Page 17 Notes...
  • Page 18 Kenmore ® Customer Care Hotline To schedule in-home repair service or order replacement parts Para pedir servicio de reparación a domicilio, y ordenar piezas 1-844-553-6667 www. kenmore. com ®...

Table of Contents