Advertisement
Quick Links
Installation
Instructions
Full Size Tumble Action Washers
Before
beginning
installation,
carefully
read these
instructions.
This will simplify
the
installation
and ensure the washer is installed correctly and safely. Leave these instructions
near the washer
after installation
for future reference.
NOTE." The electrical service to the washer
must conform
with local codes and ordinances
and the latest edition
of the National
Electrical Code, ANSI/NFPA 70.
For your safetythe
information
in this manual must be followed
to minimize
the risk of
fire
or explosion
or
to prevent
property
damage,
personal injury or loss of life.
Do not store
or use gasoline
or other
flammable
vapors and liquid in the vicinity
of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do
not use any phone in your building.
• Clear the room, building or area of all
occupants.
• Immediately
call your gas supplier from
a neighbor's
phone. Follow the gas
suppliers instructions.
• If you cannot reach your gas supplier,
call the fire department.
nstallation
and service must be performed
by a qualified
installer, service agency or the
gas supplier.
Contents
SUBJECT
PAGE
Product Registration
2
Important Safety Instructions
2-3
Pre-lnstallation Requirements
4
Electrical Requirements
4
Grounding Requirements
4
Water Supply Requirements
4
Drain Requirements
4
Rough-In Dimensions
5
Location Of Your Washer
6
Unpacking
6
Installation
7-8
Replacement Parts
8
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179 U.S.A.
Printed in U.S.A.
P/N 134309800 (0309)
Advertisement
