Download Print this page

Kenmore 41744102301 Installation Instructions Manual

Tumble action washer
Hide thumbs

Advertisement

Quick Links

Pre-lnstallation
Requirements
..........................
2
.....................................
2
.................................
2
..............................
2
..........................................
2
.........................................
3
..................................
4
.........................................................
4
.........................................................
5
Parts .............................................
5
Before beginning
installation,
carefully
read these instructions.
This will simplify the installation
and ensure the washer is installed correctly
and safely. Leave these instructions
near the
washer after installation
for future reference.
NOTE: The electrical
service to the Washer
must conform with local codes and ordinances
and
the latest edition of the National Electrical
Code, ANSI/NFPA
70.
Save These Instructions
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
1
P/N 134122600(0204)

Advertisement

loading

  Summary of Contents for Kenmore 41744102301

  • Page 1: Table Of Contents

    Pre-lnstallation Requirements ......Electrical Requirements ........Grounding Requirements ......... Water Supply Requirements ......Drain Requirements .......... Rough-In Dimensions ......... Location Of Your Washer ........Unpacking ............Installation ............Replacement Parts ..........Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the washer is installed correctly and safely.
  • Page 2: Electrical Requirements

    Foryoursafetythe information i n Since your washer is equipped with a power supply thismanual mustbefollowed tominimize theriskof cord having an equipment-grounding conductor and fire or explosion or to preventproperty damage, a grounding plug, the plug MUST be plugged into personal injuryorlossoflife. an appropriate, copper wired receptacle that is properly installed and grounded in accordance with...
  • Page 3: Rough-In Dimensions

    ROUGH-IN DIMENSIONS 263¼ "_ (67.9) _" (43.2) (152.4)| 24 3A 27/8 (62.9) (2.54) (7.3) 11/23_ (91.5) (3.81) Water Inlets P_wc_r Under 331/2 (80.3) Counter (87.9) (85) SIDE BACK Adjustable Legs UNDER COUNTER INSTALLATION If an under counter* installation is desired, the washer MUST have a top sheet kit installed, DIV 26970131445600. Kit is available from Sears Parts Department.
  • Page 4: Location Of Your Washer

    LOCATION OF YOUR WASHER Remove the styrofoam base. DO NOT INSTALL YOUR WASHER: Carefully return the washer to an upright position In an area exposed to dripping water or outside and remove the carton. weather conditions. The ambient temperature Carefully move the washer to within 4 feet (122cm) should never be below...
  • Page 5: Installation

    INSTALLATION Run some water from the hot and cold faucets to flush water lines remove particles that might clog the water valve screens. Remove inlet hoses rubber washers from Cable plastic install rubber washers in each of the inlet hoses. (90 °...
  • Page 6 [DO NOT PRINT P/N 134122600 m English Page 6 left intentionally blank.]...

This manual is also suitable for:

41744142400