4-28
Removing EMI Shields and Filler Panels
Upgrades and Options
1. Power off the system as described earlier in this
chapter.
2. Remove the front panel as described earlier in this
chapter.
3. The EMI (Electromagnetic Interference) shield is
released by pressing the tab on the left side of the
shield to right. Remove the EMI shield covering the
bay into which you are installing a peripheral device.
Save the shield for reinstallation. See Figure 4-14, A.
4. Remove the screws and filler panel covering the bay
into which you are installing a peripheral device.
Save the panel and screws for reinstallation. See
Figure 4-14, B.
Figure 4-14. EMI Shield and Filler Panels Removal
A
B