Scsiselect Configuration Settings - NEC LE2200 User Manual

SCSISelect Configuration Settings

OPTION
SCSI Bus Interface Definitions
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination
Additional Options
Boot Device Options
Boot Target ID
Boot LUN Number
SCSI Device Configuration
Initiate Sync Negotiation
Maximum Sync Transfer Rate
Enable Disconnection
Initiate Wide Negotiation
Send Start Unit Command
BIOS Multiple LUN Support
Include in BIOS Scan
Advanced Configuration Options
Reset SCSI Bus at IC Initialization
1
No effect if BIOS is disabled.
4
Set to 40.0 for AIC7880 or 10.0 for AIC7860.
The following keys are active for all SCSISelect screens:
KEY
Arrows Up and down arrows move from one parameter to
another within a screen.
ENTER Displays options for a configurable parameter.
Selects an option.
ESC Moves back to previous screen or parameter or
EXIT if at the Main menu.
F5 Switches between color and monochrome.
F6 Resets to host adapter defaults.
Table 3-7 shows the normal settings for the SCSISelect
Utility and provides a place for you to record any
changes you make to these settings.
Table 3-7. SCSISelect Setup Configurations
RECOMMENDED SETTING
7
Enabled
Enabled
Press ENTER for menu
0
0
Press ENTER for menu
Yes
40.0
Yes
Yes
Yes
1
no
Yes
Press ENTER for menu.
Enabled
ACTION
OR DISPLAY ONLY
4
1
1
Configuring Your System
3-21
YOUR
CONFIGURATION