NEC LE2200 User Manual page 36

3-8
Board Description:
Manufacturer:
Interrupts (Select from scrollable list)
DMA Channels (Select from scrollable list)
Port address
Start
End
Memory address
Start
Length
Slot
Configuring Your System
7. The Add a board without a .cfg file screen is
displayed. Read through the information and press
ENTER. The Add a board without a .cfg file screen
reappears. When the screen reappears select Create
.cfg file and press ENTER.
8. The Create A Board CFG File screen is displayed. At
this screen enter the board description and
manufacturer and press ENTER.
9. The New Board Setup screen is displayed. Using the
scrollable list select the resources used by the new
ISA board. Table 3-4 provides a place for you to
record the configuration you assign to the board.
10. Press F10 when you are finished selecting the
resources used by the new ISA board.
11. The View Current Settings screen is displayed. Press
ENTER to save the current settings.
12. The Add confirmation screen is displayed. Review
the manufacturer's comments and press ENTER.
Table 3-4. ISA Board Configurations
ISA BOARD DEFINITIONS YOUR CONFIGURATION