Kenmore Bottom-Mount Refrigerator Use & Care Manual page 6

Installing Your Refrigerator
How to Remove the Doors and Hinges
Some installations require door removat to get refrigerator to final _ocation If removal of the pullout drawer is required, see
section entitIed How to Remove and install the Pullout Drawer
I _ WARNING J
To avoid electrical shock which can cause severe personal injury or death, observe the following:
• Disconnect power to refrigerator before removing doors Connect power only after replacing doors
[ CAUTlO. ]
To avoid damage to walls and flooring, protect soft vinyl or other flooring with cardboard, rugs, or other protective material
1
center hinge pin. .............. _ J
I6 Hold [reezer door in place !
while removing center hinge -_
pin_, a.%,,, he,; m,,d,_ver./_-;
Remove lJ'eezer door. 7_
, • Retain hinge pin for later use,,................ / f ,
Unscrew s./_6" hex head t
screws from top hinge to
remove hinge.
. Retain all screws for later use
How to Reverse the Doors
Z Perform all steps listed in How to |
Remove the Doors and Hinges. ,,,,
J
,IHI.H I t I
2 Trans£er cabinet plugs and
cabinet screws to opposite _.j_
side of cabinet. _-._"_ . /_
Remove cabinet plugs with flat _J_'_/
blade screwdriver tip wrapped _-r-r-r-r-r-r_ _
in masking tape, " _
• Remove center' mullion screws _ L U
with _/_6" h ex head driver I -_/" _"_
"
For swing doors only _
Remove. bottom mullion screws __'_-_
with 3/8 hex head ddver, _ "
IMPORTANT: When working direcfly on doors, #ace doors
on a nonabrasive surface protected by towels or rugs to
avoid damage to door finish
_4_ _l_e How te |nstailiHHHland Remove 1
Handles to remove and reinstall
handles. .....................................
)