Loading The Top Rack - Kenmore 665.15972 Use & Care Manual

Combo Cup shelves
Loading the Top Rack
The top rack is designed for cups, glasses, and smaller
items. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
Fold down the extra shelves on the right side of the top
rack. Use the Combo Cup shelves to hold a variety of
items.
• Hold additional cups and/or stemware in the Stemware
Rests.
10 place setting
• Hold lightweight plastic lids in place in the Lid Holders.
Or you can place long items such as utensils and
spatulas on the Combo Cup shelf.
12 place setting
Place items so open ends face down for cleaning and
draining.
Load
glasses
in top rack only. The bottom rack is not
designed for glasses. Damage can occur.
Place cups and glasses in the rows between prongs.
Placing them over the prongs can lead to breakage.
China, crystal, and other delicate items must not touch
each other during dishwasher operation. Damage may
OCCU_
Load plastic items in the top rack only. Only plastic
items marked "dishwasher safe" are recommended.
Load plastic items so the force of the spray does not
move them during the cycle.
To avoid chipping, do not let stemware touch other
items.
Small bowls, pans, and other utensils can be placed in
the top rack. Load bowls in the center section for best
stability.
Place knives, sharp-edge down in the Knife Holder.
1. Flip up the front Knife Holder so the word HANDLE
faces you.
2. Flip up the rear Knife Holder so the word BLADE
faces you.
3. Place knives in the holder as shown.
NOTE: Always point the knives to the rear of the Knife
Holder with the blades down.
9