Loading The Bottom Rack - Kenmore 665.15972 Use & Care Manual

Fold-down tines
Foldthe tines in the top rack allthe way downto
accommodatelarger items.
Load plates, soup bowls, etc., between prongs and
facing inward to the spray.
Ovedap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a
variety of ways depending upon their size and shape.
Load bowls securely between the rows of prongs. Do
not nest bowls because the spray will not reach all
surfaces.
No-flip clips
The no-flip clips hold lightweight plastic items like cups,
lids, or bowls in place during washing. You can move a clip
anywhere in the rack.
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Loading the BottomRack
The bottom rack is designed for plates, pans, casseroles,
and utensils. Items with cooked-on or dried-on food
should be loaded with soiled surfaces facing inward to the
spray. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary
from the drawings shown.
12 p/ace setting
Load cookie sheets, cake pans, and other large items
at the sides and back. Loading such items in front can
keep the water spray from reaching the detergent
dispenser and silverware basket.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop
rotation of the spray arm(s). The spray arm(s) must
move freely.
Do not load items between the bottom rack and the
side of the dishwasher tub. You can block the water
inlet opening.
Fold-down tines
You can fold down one or both rows of tines at the back of
the bottom rack.
10 place setting
Do not load glasses, cups, or plastic items in the
bottom rack. Load small items in the bottom rack only
if they are secured in place.
1. Grasp the tip of the tine that is in the tine holder.
2. Gently pull the tine out of the tine holder.
3. Lay the row of tines down in the rack to make room for
larger dishes, bowls, pots, pans or roasters.
10