Carton Contents; Assembly - Craftsman 486.245313 Owner's Manual

CARTON CONTENTS

1. Boom Mount Bracket
2. Lid
3. Tank with Frame Tubes
REMOVAL OF PARTS FROM CARTON
• Remove all parts and hardware packages from the
carton. Lay out all parts and hardware and identify
using the illustrations on pages 3 and 4.
TOOLS REQUIRED FOR ASSEMBLY
(2) 1/2" Wrenches
(1) Screwdriver
(1) Pliers
(1) Hammer
• Assemble the axle through the holes in the frame
tubes. You may need to slightly loosen the bolts in the
frame tubes to make the axle fit. Retighten the bolts
only enough to flatten the lockwashers. See figure 1.
• Assemble a spacer, a 1/2" flat washer, a wheel and
another 1/2" flat washer onto the axle. Lightly tap a
palnut onto the end of the axle. Repeat on other end
of axle. See figure 1.
1/2" FLAT
WASHER
PALNUT
FIGURE 1
4. Spray Gun Assembly
5. Boom Assembly
6. Hitch Arms (2)
1
2
3
6
SPACER
AXLE

ASSEMBLY

4
• Assemble a hitch arm to the inside of a frame tube
underneath the tank. Use two 5/16" x 2" hex bolts and
5/16" nylock nuts as shown in figure 2. Do not tighten
yet. Repeat for other side.
FIGURE 2
4
7. Hitch Brackets (2)
8. Axle
9. Wheels (2)
5
8
7
5/16" NYLOCK NUT
5/16" x 2"
HEX BOLT
9
HITCH ARM