Pendant Mount (Optional) - D-Link DCS 6513 User Manual

Section 2: Assembly and Installation
ƒ Height: 201 mm (7.9 inches)
ƒ Diameter: 150 mm (5.9 inches
ƒ Weight: 665 g (1.45 lbs)
1. Attach the mounting plate to the bracket cap using the three screws.
2. Locate a suitable position on the ceiling for a 34mm (+2 / –0 mm) hole to be cut. A
template is included to aid in marking the mounting hole.
3. Cut a hole in the ceiling according to the template.
4. Drill four separate 6mm holes corresponding to the holes in the mounting template
and insert the plastic anchors into these holes.
5. Place the rubber seal between the pendant bracket and the ceiling to ensure a
waterproof seal between the ceiling and the bracket.
6. Attach the pendant bracket to the ceiling using the screws provided.
7. Attach the bracket cap to the bottom of the pendant bracket by rotating the cap
counterclockwise to tighten it into place.
8. Insert the screw into the base of the pendant bracket at the top of the bracket cap
to secure the bracket cap into place.
D-Link DCS-6513 User Manual

Pendant Mount (Optional)

)
Mounting
Plate
Bracket
Cap
Rubber
Seal
Pendant
Bracket
Bracket
Cap
15