Section 2: Assembly and Installation
Step 1
Insert the Installation CD-ROM into your computer's optical drive to start the autorun program.
The CD-ROM will open the Camera Installation Wizard. The Setup Wizard will guide you through
the installation process through to configuring your camera.
Note:
If the autorun program does not automatically start on your computer, go to Windows, click
Start > Run. In the Run command box type D:\DCS6513.exe, where D: represents your CD-
ROM drive.
Step 2
Accept the End User Licence Agreement and follow the on screen prompts to install the Camera
Installation Wizard.
Step 3
Select your camera from the list, then click Wizard. If you have multiple cameras, you can
identify them by the MAC ID printed on the label on the back of your camera.
D-Link DCS-6513 User Manual
Software Installation
26