Installation Of Weather Shield - D-Link DCS 6513 User Manual

Full hd wdr day & night outdoor dome network camera

Hide thumbs Also See for DCS 6513:

Table of Contents

Section 2: Assembly and Installation

Installation of Weather Shield

The DCS-6513 comes with an optional weather shield to protect your network camera against damage from adverse weather. If you are

installing the DCS-6513 in a location where it will be exposed to harsh weather, it is recommended that you install the weather shield.

The weather shield should be installed before you commence mounting or connecting the camera in its final location. To install the weather

shield, you will require the 37mm screws which were included in the product package.

Step 1: Using a screwdriver, remove the existing two screws which were pre-installed in the collar of the camera

Step 2: Place the weather shield over the dome of the camera and align the screw holes with the holes in the collar of the camera

Step 3: Install the 37mm screws into the existing screw holes so that they hold the weather shield in place

Install 37mm Screws

Weather Shield

Remove Existing Screws

D-Link DCS-6513 User Manual

Table of Contents

6513