Download  Print this page

D-Link DCS 6513 User Manual

Full hd wdr day & night outdoor dome network camera.
Hide thumbs

Advertisement

Version 1.0 | 03/06/2013

User Manual

Full HD WDR Day & Night Outdoor Dome Network Camera
DCS-6513

Advertisement

   Related Manuals for D-Link DCS 6513

   Summary of Contents for D-Link DCS 6513

  • Page 1: User Manual

    Version 1.0 | 03/06/2013 User Manual Full HD WDR Day & Night Outdoor Dome Network Camera DCS-6513...
  • Page 2: Manual Revisions

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
  • Page 3: Table Of Contents

    D-ViewCam Setup Wizard ..........29 Firmware Upgrade ............68 Configuration ................31 Status ..................69 Using the Configuration Interface ........31 Device Info ................69 Live Video ................32 Logs ..................70 Setup ..................34 Help..................71 Setup Wizard ..............34 DI/DO Specifications ..............72 Network Setup ..............40 Technical Specifications ............73 D-Link DCS-6513 User Manual...
  • Page 4: Product Overview

    If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage than the one included with your product will cause damage and void the warranty for this product. D-Link DCS-6513 User Manual...
  • Page 5: Introduction

    • Internet Explorer 7 or above , Firefox 3.5 or above, Safari 4 and Chrome 8.0 or above • Existing 10/100 Ethernet-based network • An Micro SD memory card (optional) is required for recording to onboard storage. SDHC Class 6 or above is recommended. • Broadband Internet connection D-Link DCS-6513 User Manual...
  • Page 6: Features

    PoE (Power over Ethernet) for Flexible Installation The DCS-6513 can draw all the power it needs from a PoE switch or PoE injector, negating the need for a separate power installation. D-Link DCS-6513 User Manual...
  • Page 7: Hardware Overview

    Infrared LEDs illuminate the camera's field of view at night Power/Status LED Indicates the camera's current status The camera is housed in an IP67 certified weatherproof casing, which protects Protective Casing it against rain and dust. This case is also IK-10 certified vandal-resistant. D-Link DCS-6513 User Manual...
  • Page 8: Cable Harness

    DI/DO Connector I/O connectors for external devices. 12V DC output. Reset Button Press and hold the recessed button for 10 seconds to reset the camera. 24 V Power Connector Connects to 24 V AC power supply. D-Link DCS-6513 User Manual...
  • Page 9: Internal

    To eject the Micro SD card, push the Micro SD card into the slot. Micro SD Card Slot Insert an Micro SD card for local storage of recorded image and video D-Link DCS-6513 User Manual...
  • Page 10: Assembly And Installation

    5. Cut an access hole in the ceiling for the cables. 6. Drill four separate 6mm holes corresponding to the holes in the mounting template and insert the plastic anchors into these holes. 7. Attach the surface bracket to the ceiling using the screws provided D-Link DCS-6513 User Manual...
  • Page 11 1. Connect the Ethernet cable and the power cable, threading them through the hole in the ceiling. 2. Push the dome body up over the base of the camera. 3. Attach the dome to the base of the camera using the three long screws and the provided security screw. D-Link DCS-6513 User Manual...
  • Page 12: Exposed Cable Installation

    ƒ Diameter: 183 mm (7.2 inches) ƒ Weight: 400 g (0.9 lbs) 1. Disassemble the camera enclosure (see page 9). 2. Remove the small screw to release the faceplate on the side of the base of the camera D-Link DCS-6513 User Manual...
  • Page 13 2. Thread the cables through the waterproof plugs on the side of the base of the camera. Attach the cables to the corresponding cable connectors. 3. Place the plastic cable cover onto the dual-holed plate and attach it using the screw. D-Link DCS-6513 User Manual...
  • Page 14 4. Attach the surface bracket to the ceiling using the screws provided. 5. Place the dome body onto the base of the camera. 6. Attach the dome to the base of the camera using the three long screws and the provided security screw. D-Link DCS-6513 User Manual...
  • Page 15: Pendant Mount (optional)

    7. Attach the bracket cap to the bottom of the pendant bracket by rotating the cap Bracket counterclockwise to tighten it into place. 8. Insert the screw into the base of the pendant bracket at the top of the bracket cap to secure the bracket cap into place. Bracket D-Link DCS-6513 User Manual...
  • Page 16 Section 2: Assembly and Installation 1. Connect the Ethernet cable and the power cable, then thread them through the pendant bracket. 2. Place the dome body onto the base of the camera. D-Link DCS-6513 User Manual...
  • Page 17 Section 2: Assembly and Installation 1. Attach the dome to the base of the camera using the three long screws and the provided security screw. D-Link DCS-6513 User Manual...
  • Page 18: Bent Mount (optional)

    8. Insert the screw into the base of the wall mount bracket at the top of the bracket cap to secure the bracket cap into place. 9. Connect the Ethernet cable and the power cable and thread them through the wall mount bracket. Bracket D-Link DCS-6513 User Manual...
  • Page 19 Section 2: Assembly and Installation 1. Place the dome body onto the base of the camera. Bent Bracket Dome Camera D-Link DCS-6513 User Manual...
  • Page 20 Section 2: Assembly and Installation 1. Attach the dome to the base of the camera using the three long screws and the provided security screw. D-Link DCS-6513 User Manual...
  • Page 21: Installation Of Weather Shield

    Step 2: Place the weather shield over the dome of the camera and align the screw holes with the holes in the collar of the camera Step 3: Install the 37mm screws into the existing screw holes so that they hold the weather shield in place Install 37mm Screws Weather Shield Remove Existing Screws D-Link DCS-6513 User Manual...
  • Page 22: General Connection Using 12 V Dc Power Adapter

    Section 2: Assembly and Installation General Connection Using 12 V DC Power Adapter 1. Connect the network camera to a hub via an Ethernet cable. 2. Connect the supplied power cable from the camera to a power outlet. D-Link DCS-6513 User Manual...
  • Page 23: General Connection Using 24 V Ac Power Wiring

    Section 2: Assembly and Installation General Connection Using 24 V AC Power Wiring 1. Connect the network camera to a hub via an Ethernet cable. 2. Connect the supplied power cable from the camera to a power source. D-Link DCS-6513 User Manual...
  • Page 24 Connection with a PoE Hub 1. If you are using a PoE hub, connect the IP camera to the hub via an Ethernet cable, which will provide transmission of both power and data over a single cable. D-Link DCS-6513 User Manual...
  • Page 25: Adjusting The Lens 3-axis Angle

    Turn the lens to adjust the IP camera’s image until the desired orientation is achieved, tighten the image adjustment screw once completed. D-Link DCS-6513 User Manual...
  • Page 26: Software Installation

    Installation Wizard. Step 3 Select your camera from the list, then click Wizard. If you have multiple cameras, you can identify them by the MAC ID printed on the label on the back of your camera. D-Link DCS-6513 User Manual...
  • Page 27 Enter the correct configuration information and click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. Click Next to continue. D-Link DCS-6513 User Manual...
  • Page 28 The LED on the front of the DCS-6513 will blink, then turn solid green once it successfully connects to your network.. Step 7 Your DCS-6513 camera is now set up, Click Exit to exit the wizard and can skip to "Configuration" on page 31 for advanced configuration of your camera. D-Link DCS-6513 User Manual...
  • Page 29: D-viewcam Setup Wizard

    Section 2: Assembly and Installation D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance.
  • Page 30 Section 2: Assembly and Installation Step 3 Click Finish to complete the installation. Step 4 To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. Step 5 For more detailed operation of using D-ViewCam software, please refer to the D-ViewCam Manual.
  • Page 31: Configuration

    OK. Step 1 Click the Link button on the Wizard. The Setup Wizard will automatically open your web browser to the IP address of the camera. Step 2 Enter your credentials to access the configuration interface. D-Link DCS-6513 User Manual...
  • Page 32: Live Video

    Stops the camera ePTZ motion Preset Path Starts the camera's motion along the predefined path ePTZ Speed: You may select a value between 0 and 10. 0, where 1 is the slowest and 10 is the fastest. D-Link DCS-6513 User Manual...
  • Page 33 Listen/Stop Audio In (from microphone) Full screen mode Start/Stop Audio Out (to speaker) Take a Snapshot Start/Stop Digital Output Go To: If any presets have been defined, selecting a preset from this list will (Preset List) display it. D-Link DCS-6513 User Manual...
  • Page 34: Setup

    To quickly configure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to"Motion Detection" on page 51. D-Link DCS-6513 User Manual...
  • Page 35: Internet Connection Setup Wizard

    Section 3: Configuration Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. If your internet service provider has not provided you with connection settings, or you are unsure of which settings to choose, select DHCP.
  • Page 36 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-6513 User Manual...
  • Page 37 Configure the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. Confirm the settings are correct and click Apply to save them. The settings will be saved to the DCS-6513 and the camera will restart. D-Link DCS-6513 User Manual...
  • Page 38: Motion Detection Setup Wizard

    Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. D-Link DCS-6513 User Manual...
  • Page 39 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-6513 User Manual...
  • Page 40: Network Setup

    Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: The primary domain name server translates names to IP addresses. Secondary DNS: The secondary DNS acts as a backup to the primary DNS. D-Link DCS-6513 User Manual...
  • Page 41 PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera. D-Link DCS-6513 User Manual...
  • Page 42 Enable Multicast for stream available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. D-Link DCS-6513 User Manual...
  • Page 43: Dynamic Dns

    DDNS account. Password: Enter the password used to connect to your DDNS server account. Timeout: Enter the DNS timeout values you wish to use. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-6513 User Manual...
  • Page 44: Image Setup

    Auto, Outdoor, Indoor, Fluorescent, and Push Hold. Exposure Mode: Changes the exposure mode. Use the drop-down box to set the camera for Indoor, Outdoor, or Night environments, or to Moving to capture moving objects. D-Link DCS-6513 User Manual...
  • Page 45 WDR Level: Specify a value from 0 to 10 to specify how much WDR to apply to the image, or select None. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-6513 User Manual...
  • Page 46: Audio And Video

    Maximum frame rate: A higher frame rate provides smoother motion for videos, but requires more bandwidth. Lower frame rates will result in stuttering motion, however will require less bandwidth. D-Link DCS-6513 User Manual...
  • Page 47 This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off: Selecting this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-6513 User Manual...
  • Page 48: Lens Control

    Zoom Control Use the slider control to fine tune the camera zoom. Focus Control Use the slider control to fine tune the camera focus. Fine Tune Focus automatically: Allow the camera to adjust the focus automatically. D-Link DCS-6513 User Manual...
  • Page 49: Preset

    Clicking the Remove button will delete the currently selected preset. Preset Sequence: This section allows you to create a preset sequence, which automatically moves the camera's view between a set of preset views. D-Link DCS-6513 User Manual...
  • Page 50 Clicking the trash can button will remove the currently selected preset from the sequence. If you want to change the dwell time for a preset, select it from the list, enter a new dwell time, then click the Update button. D-Link DCS-6513 User Manual...
  • Page 51: Motion Detection

    Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-6513 User Manual...
  • Page 52: Time And Date

    Internet time server. Choose the one that is closest to your location. Set the Date and Time Manually: This option allows you to set the time and date manually. Copy Your Computer's Time This will synchronize the time information from your PC. Settings: D-Link DCS-6513 User Manual...
  • Page 53: Event Setup

    Snapshot, Video Clips Email, FTP To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be performed when a trigger is activated. D-Link DCS-6513 User Manual...
  • Page 54 1. To add a new item - "event, server or media," click Add. A screen will appear and allow you to update the fields accordingly. 2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. D-Link DCS-6513 User Manual...
  • Page 55: Add Server

    Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-6513 User Manual...
  • Page 56: Add Media

    9 images are generated after a trigger is activated. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. The moment the trigger is activated. D-Link DCS-6513 User Manual...
  • Page 57 Set the maximum file size to record for your video clips. System log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-6513 User Manual...
  • Page 58: Add Event

    Triggers an event when the system boots up. Network Lost: Triggers an event when the network connection is lost. Time: Select Always or enter the time interval. Server: Specify the location where the event information should be saved to. D-Link DCS-6513 User Manual...
  • Page 59: Add Recording

    Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space. It is advised not to save other files in the same folder as recording files. D-Link DCS-6513 User Manual...
  • Page 60 Time of each file for recording: If this is selected, files will be separated based on the maximum length you specify. File Name Prefix: The prefix name will be added on the file name of the recording file(s). D-Link DCS-6513 User Manual...
  • Page 61: Sd Card

    Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-6513 User Manual...
  • Page 62: Advanced

    N.O. stands for Normally Open. This means that the normal state of the circuit is open. Therefore events are triggered when the device status changes to "Closed." Video Output: Enable/ disable the BNC terminal TV output signal. D-Link DCS-6513 User Manual...
  • Page 63: Icr And Ir

    The IR light will always be on. Sync: The IR light will turn on when the ICR sensor is on. Schedule: The IR light will turn on or off according to the schedule that you specify below. D-Link DCS-6513 User Manual...
  • Page 64: Https

    Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate, you must first uncheck Enable HTTPS secure connection. D-Link DCS-6513 User Manual...
  • Page 65: Access List

    When the range of the Allowed List is set from 1.1.1.0 to 192.255.255.255 and the range of the Denied List is set from 1.1.1.0 to 170.255.255.255. Only users with IPs Denied Alowed located between 171.0.0.0 and 192.255.255.255 can List List access the Network Camera. D-Link DCS-6513 User Manual...
  • Page 66: Maintenance

    Label: Enter a label for the camera, which will be shown on the OSD when it is enabled. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-6513 User Manual...
  • Page 67: System

    Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-6513 User Manual...
  • Page 68: Firmware Upgrade

    Section 3: Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-6513, please download and save the latest firmware version from the D-Link Support Page to your local hard drive.
  • Page 69: Status

    Section 3: Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-6513 User Manual...
  • Page 70: Logs

    Section 3: Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-6513 User Manual...
  • Page 71: Help

    Section 3: Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-6513 User Manual...
  • Page 72: Di/do Specifications

    Appendix A: DI/DO Specifications DI/DO Specifications D-Link DCS-6513 User Manual...
  • Page 73: Technical Specifications

    ƒ PPPoE ƒ UDP ƒ UPnP port forwarding ƒ ICMP ƒ RTP / RTSP/ RTCP ƒ DHCP client ƒ IP filtering ƒ NTP client (D-Link) ƒ QoS ƒ DNS client ƒ CoS ƒ DDNS client (D-Link) ƒ Multicast ƒ SMTP client ƒ...
  • Page 74 Operating: -40 to 50 °C (-40 to 122 °F) Storage: -20° to 70° C (-4° to 158° F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certifications CE LVD C-Tick Optional DCS-34-2 Pendant Mount DCS-34-3 Bent Arm Mount Accessories D-Link DCS-6513 User Manual...
  • Page 75 Appendix A: Technical Specifications Dimensions D-Link DCS-6513 User Manual...

This manual also for:

Dcs 65136513

Comments to this Manuals

Symbols: 0
Latest comments: