3. REPLACING THE IMPORTANT PARTS
3.11 Replacing the Black Mark Sensor
1. Refer to section 3.1 to remove the top cover.
2. Remove the sensor connector from the main PC board.
3. Use the Phillips screwdriver to remove the 2 screws from the mylar sheet.
4. Remove the mylar sheet.
Sensor Connector (JP17)
Mylar Sheet
5. Use the Phillips screwdriver to remove the screw from the sensor plate.
6. Remove the sensor plate.
7. Remove the black mark sensor.
3-22
EO18-33025
(Revision Date: Mar. 27, 2009)
3.11 Replacing the Black Mark Sensor
Main PC Board
FLT-3x6 Screw
T-1.5x4 Screw
Sensor Plate
Black Mark Sensor