Maintenance - Toshiba B-EV4 Series Manual

5. MAINTENANCE

5. MAINTENANCE
DO NOT USE a spray cleaner containing flammable gas for cleaning this product, as this may cause a fire.
This section presents the clean tools and methods to maintain your printer.
1. Please use one of following material to clean the printer.
• Cotton swab
(Head cleaner
• Lint-free cloth
• Vacuum / Blower brush
• 100%
ethanol
2. The cleaning process is described as following
Printer Part
Print Head
Platen Roller
Tear Bar/Peel Bar
Sensor
Exterior
Interior
pen)
Method
1. Always turn off the printer before
cleaning the print head.
2. Allow the print head to cool for a
minimum of one minute.
3. Use a cotton swab (Head cleaner
pen) and 100% ethanol to clean the
print head surface.
1. Turn the power off.
2. Rotate the platen roller and wipe it
thoroughly with 100% ethanol and a
cotton swab, or lint-free cloth.
Use the lint-free cloth with 100%
ethanol to wipe it.
Compressed air or vacuum
Wipe it with water-dampened cloth
Brush or vacuum
WARNING!
Clean the print head when changing a new
label roll.
Clean the platen roller when changing a new
label roll.
As needed
Monthly
As needed
As needed
5-1
EO18-33025
5. MAINTENANCE
Interval