3. REPLACING THE IMPORTANT PARTS
3.7 Replacing the Gear Cover
1. Refer to section 3.2 to remove the lower cover.
2. Use the Phillips screwdriver to remove the 4 screws.
3. Remove the gear cover.
4. Remove the each gear.
NOTE: Between 200 dpi printer and 300 dpi printer, the number of gears and the position
of the motor pulley differ. Be careful of the orientation of the gear when replacing.
SM-3x6 Screw
300dpi model
200dpi model
3-17
EO18-33025
(Revision Date: Mar. 27, 2009)
3.7 Replacing the Gear Cover
Gear Cover
Motor Pulley
LUBRICATION
Gear: FLOIL
Motor Pulley
LUBRICATION
Gear: FLOIL