Paradox Esprit 616LED User Manual page 13

Key [8] Timer loss
If the system timer is not functioning, usually after total
battery and AC power failure, key [8] illuminates. The
timer should be reprogrammed after total power loss.
To reprogram the timer (control panel software ver-
sions prior to 2.00): Press [ ] + master code/user
ENTER
1 code + [ ]. Then enter 2 digits (00 to 23) for
MEM
hours, followed by 2 digits (00 to 59) for minutes.
Press [ ] twice. If trouble key [8] is still illuminat-
ENTER
ed, press [ ] + [ ] after programming the time.
TRBL CLEAR
To reprogram the timer (control panel software ver-
sions 2.00 and beyond): Press [
code/user 1 code + [ ]. Key [
MEM
enter 2 digits (00 to 23) for hours, followed by 2 dig-
its (00 to 59) for minutes. Press [
Key [9] Tamper/zone wiring failure
Key [9], if illuminated, means that there is a wiring
problem in one of your protected zones.
Key [10] Telephone line monitor
Key [10] illuminates if the panel detects the loss of
the telephone line.
Key [11] Fire/trouble
If the fire zone is cut, the fire zone key and trouble
key [11] will illuminate.
Most of these "trouble" conditions will be programmed
by your installer to be reported directly to your securi-
22
UM616-626
ty company. Please make sure to contact your alarm
company, however, to ensure that repairs are imme-
diately made to your security system.
Fire Alarm Operation
Alarm
Upon a Fire Alarm, the bell/siren will operate in
"pulse mode".
Silence/Reset
To silence or reset a fire alarm, enter a valid user code.
Note: IF A FIRE CONDITION EXISTS, FOLLOW
] + master
ENTER
] flashes. Then
MEM
].
ENTER
Fire Safety in the Home
Reasonable fire safety can be achieved by following
a three point program:
1. Minimizing fire hazards
2. Providing a fire warning system
3. Having and practicing an escape plan
Minimizing Fire Hazards
The three traditional fire killers are:
1. Smoking in bed
2. Leaving children home alone
3. Cleaning with flammable liquids such as gasoline
YOUR EVACUATION PLAN IMMEDIATELY!
If there is no fire condition, contact your moni-
toring company without delay to avoid an
unnecessary response.
23
UM616-626