Keyswitch Arming; Auto-Arming - Paradox 1689 User Manual

4.8 KEYSWITCH ARMING

A keyswitch can be used to arm and disarm the system. A
keyswitch is programmed to Stay Arm (see section 4.4) or
Regular Arm (see section 4.3) and is assigned to a specific
partition. A keyswitch can function as a Maintained or
Momentary keyswitch.
To arm the system using a Maintained Keyswitch, set the
keyswitch to the "on" position. To disarm the system set the
keyswitch to the "off" position.
To arm the system using a Momentary Keyswitch, set the
keyswitch to the "on" position then turn it back to the "off"
position. Repeating this sequence will disarm the system.

4.9 AUTO-ARMING

The Spectra alarm system can be programmed to
automatically arm upon the following two conditions.
4.9.8 Timed Auto Arming
You can program the time your alarm system will
automatically arm itself everyday.
26 User's Manual