Watching Tv; Finding Programs Using The Program Guide; Closing The Menus - Dish Network DTVPAL User Manual

YOUR DTVPAL DIGITAL-TO-ANALOG TV
CONVERTER
WATCHING TV
Closing the Menus
There are several ways to exit out of the on-screen menus.
• Select Done to save any changes you've made in a menu.
• Press CANCEL (or select Cancel) to exit a menu without saving changes.
• Press VIEW TV to exit out of all the menus and return to watching TV.
• Menus will automatically close after several minutes of inactivity.
WATCHING TV
Press the UP or DOWN ARROWS to move through the available channels one
channel at a time. If you know the channel's number, you can enter the channel
number using the remote control's NUMBER PAD.
To change to a sub-channel, enter "0" before entering the channel number. For
example, to change to channel 9-2, enter "0092" on the NUMBER PAD. See
page 4 for an explanation of sub-channels.
Press INFO while watching -IV or while in the Program Guide to view additional
information on the program.
Note: To view Closed Captioning information, you must either enable Closed
Captions through your DTVPat menus (press the CC button on the remote
control or see page 18), or enable the display of Closed Captioning using your
-I-V's menus (refer to your TV's user guide).
FINDING PROGRAMS
Finding Programs Using
the Program Guide
The Program Guide displays the
list of digital over-the-air channels
and programs. The top of the
Program Guide displays the date,
time, and title of the program that
is highlighted.
Note: Program Guide information
is provided by the local channel
broadcasters. The amount of guide information available varies by channel.
• Use the ARROW buttons to move through the Program Guide.
• Use the PAGE UP or PAGE DOWN buttons to move through the Program
Guide one page at a time.
Program Guide
Page10