No Longer Receiving A Digital Signal After Installation/Set Up - Dish Network DTVPAL User Manual

YOUR DTVPAL DIGITAL-TO-ANALOG TV
CONVERTER
DTVPAL ToP TIPS
No Longer Receiving a Digital Signal After Your Installa-
tion/Set Up
• If you are no longer able to receive a digital TV signal for some or all of your
local channels and your DTVPal is hooked up correctly, it is possible that
you wilt need to adjust your over-the-air antenna or get an over-the-air
antenna that is optimized for your area as the source of the digital signal
may have moved. Go to www.antennaweb.orq for more information on
which over-the-air antenna is best for your area or visit your nearest
electronic retailer.
• You can easily check the signal
strength of a local channel by
pressing BROWSE on your
remote control when tuned to the
channel on your DTVPaI. The
signal strength for that channel
appears in the upper right hand
corner of your TV screen.
For more helpful troubleshooting
information go to page 19 in this manual.
@
MORE INFORMATION/CUSTOMER SUPPORT
1-888-667-0633 or www.dtvpal.com.
UPGRADE TO
DISH
NETWORK
Although the DTVPal is a great digital-to-analog converter box, you may not be
able to receive any or all digital over-the-air signals. Get over 100 or more of
the most popular national channels, such as Discovery, CNN, and ESPN, and
your local channels* by getting your programming through DISH Network. Call
1-888-638-9912 or visit www.dishnetwork.com/dtvpal today and get DISH
Network for the lowest all-digital price nationwide...every day!
*where available
Page viii