Download  Print this page

DISH NETWORK DTVPAL User Manual Page 31

Digital-to-analog tv converter.
Hide thumbs

Advertisement

YOUR DTVPAL
DIGITAL-TO-ANALOG
TV
CONVERTER
TROUBLESHOOTING
Symptom
Some of my local
over-the-air
channels are not
available through
my DTVPal.
I have a snowy,
blue, or black
screen.
Troubleshooting
Steps
Your DTVPal is only able to tune digital over-the-air
channels. It is possible that some of the channels you are
missing are channels that are still broadcasting in
analog.
2
You can go to the website www.antennaweb.org
to find
out which channels in your area are currently
broadcasting a digital signal. If the channel you are
missing is still in analog, you can view the channel using
the TV's tuner. To view analog channels, press the
ANALOG PASS-THROUGH
button on the DTVPal
remote control, then change channels on your TV using
your TV's remote control. When you want to return to
watching digital channels using your DTVPal, change
back to the correct channel (3 or 4) or input, and press
the ANALOG PASS-THROUGH
button again.
1
Make sure your DTVPal is powered on. Press POWER
on the DTVPal remote control.
Make sure the TV is on the correct channel or video input
to view your DTVPal. If your DTVPal is connected to your
TV using the TV SET OUT connection, the TV needs to be
on channel 3 or 4. If connected using the AUDIO/VIDEO
(RCA-type) connection, the TV needs to be on a video
input or source.
Check the connections between your DTVPal and your
TV.
Page 21

Advertisement

Chapters

Table of Contents

   Related Manuals for DISH NETWORK DTVPAL

Comments to this Manuals

Symbols: 0
Latest comments:
  • Karla Morrison Jun 20, 2019 03:27:
    Do I need to rescan on the 21 St of June.
  • Terrence Agpawa Nov 10, 2016 03:01:
    How do I order a replacemen​t remote control?