Back to Contents Page
Bezel
Dell™ Vostro™ 420/220/220s Service Manual
Removing the Bezel
Replacing the Bezel
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTICE:
The procedure for removing and replacing the bezel is identical for the Vostro 420, Vostro 220,
and Vostro 220s computers; the illustrations provided are for example only and may not represent your
particular computer precisely.
Removing the Bezel
1. Follow the procedures in
2. Remove the computer cover (see
3. With the computer still on its side, gently lift the clips slightly upward to release that edge of the bezel from the
chassis.
4. Rotate the bezel away from the computer to release the hooks on the opposite edge of the bezel from the chassis.
1
clips (4)
Replacing the Bezel
Before Working on Your
Removing the Computer
2
Computer.
Cover).
bezel