a. Raise and hold the hard-drive release latch.
b. Slide the drive partway out of the bay, rotate the back of the drive upward until the drive is perpendicular to the
drive cage, and guide the screws through the cutaway channels in the drive cage until you can lift the drive away
from the computer.
c. Repeat
step a
Vostro 220s
1
cutaway channels (2)
3
hard drive
5. For the Vostro 420 and Vostro 220:
a. Slide the hard drive into the hard drive bay.
b. Align the holes on the side of the hard drive with the holes in the drive cage, and install the screws to secure the
hard drive in the bay.
Vostro 420
and
step b
for the second hard drive, if installed.
2
hard-drive release latch
4
screw guides (4)