Replacing The Processor Heat Sink/Fan Assembly - Dell Vostro 220s Service Manual

1 Phillips screwdriver
3 heat sink/fan cable
5 screw holes with rubber bushings (4)

Replacing the Processor Heat Sink/Fan Assembly

NOTICE: Unless a new heat sink is required for the new processor, reuse the original heat sink/fan
assembly when you replace the processor.
1. Apply thermal solution to the heat sink as needed.
2. Align the four captive screws on the heat sink/fan assembly with the holes and rubber bushings on the system board.
2 heat sink/fan assembly
4 system board fan connector
6 captive screws (4)