1
chassis fan
3
screws (4)
Vostro 220s
1
system board power connector
3
screw
Replacing the Chassis Fan
1. For the Vostro 220s:
a. Lower the fan into the chassis such that the screw hole in the fan is offset and slightly forward of the screw hole
in the fan mount on the chassis.
b. Press the fan into the side of the chassis, and then slide it toward the back of the computer until it sets against
the stops.
c. Proceed to
2. While holding the chassis fan in place, align the screw hole(s) and install the screw(s) that secure the fan to the
chassis.
2
system board power connector
step
3.
2
chassis fan