Vostro 220s
To remove the 3.5-inch bay break-away metal plate, rotate the upward to twist and ultimately break the metal tabs that
attach the plate to the chassis.
NOTE:
Discard the 3.5-inch bay metal plate once it is removed. It is not designed for reuse. A front-panel insert is
available for covering the opening of the empty 3.5-inch bay (once the break-away metal plate has been initially
removed) should you decide to permanently remove a device from the 3.5-inch bay.
Vostro 220s
1
3.5-inch bay break-away metal plate
Back to Contents Page