4. Disconnect the antenna cables from the WLAN card.
The gray antenna cable may not be available in all computers. The presence of the gray antenna cable in your Mini Card compartment
depends upon the type of display.
2 M2 x 3-mm securing
5. Release the WLAN card by removing the securing screw.
6. Lift the WLAN card out of its system board connector.
Replacing a WLAN Card
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and
realign the card.
To avoid damage to the WLAN card, never place cables under the card.
3 antenna cable connectors