Replacing the Hinge Cover
Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
The hinge cover is fragile and can be damaged if extreme force is used. Exercise care when replacing the hinge cover.
This procedure assumes that you have completed the removal procedure
1. Align the two tabs underneath the left edge of the hinge cover with the corresponding notches in the computer.
2. Moving from left to right, press down until the hinge cover snaps into place.
3. Close the display and turn the computer to the back.
4. Press each hinge cover until it snaps into place.
Back to Contents Page
Removing the Hinge