Back to Contents Page
Processor Thermal-Cooling Assembly
Dell™ Vostro™ 1510
Service Manual
Removing the Processor Thermal-Cooling Assembly
Replacing the Processor Thermal-Cooling Assembly
Removing the Processor Thermal-Cooling Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Loosen the two screws that secure the memory cover. (See
3. Slide the cover out of the compartment and set it aside.
4. Remove the fan (see
Removing the
5. In sequential order, loosen the six captive screws that secure the processor thermal-cooling assembly to the system board, and carefully lift the
processor thermal-cooling assembly out of the computer.
1 processor thermal-cooling assembly 2 captive screws (6)
Replacing the Processor Thermal-Cooling Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Align the six captive screws on the processor thermal-cooling assembly with the screw holes on the system board and tighten the screws in sequential
order.
2. Replace the fan (see
Replacing the
3. Replace the memory cover and tighten the screws.
Back to Contents Page
Computer.
Removing a Memory Module
Fan).
Removing the Processor Thermal-Cooling
Fan).
for an illustration of the memory cover.)
Assembly.