1 M2 x 5-mm screws (2) 2 display panel
3 M2 x 3-mm screws (8) 4 top cover
Replacing the Display Panel
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
This procedure assumes that you have completed the removal procedure
1. Replace the eight M2 x 3-mm screws in the display panel.
2. Position the display panel assembly in the top cover.
3. Replace the camera/microphone assembly (see
4. Align the guide pins at the top of the display hinge panels and position the display panel in the top cover.
5. Replace the two M2 x 5-mm screws in the hinges.
6. Replace the display inverter (see
7. Replace the display bezel (see
8. Replace the display assembly (see
9. Replace the keyboard (see
10. Replace the hinge cover (see
11. Replace the WLAN card (see
12. Replace the hard drive cover. See
Display Cable
Removing the Display Cable
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Remove the hard drive cover. See
Replacing the Camera and Microphone
Replacing the Display
Inverter).
Replacing the Display
Bezel).
Replacing the Display
Assembly).
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a WLAN
Card).
Removing the Hard Drive
for an illustration of the hard drive cover.
Computer.
Removing the Hard Drive
for an illustration of the hard drive cover.
Removing the Display
Panel.
Assembly).