Message Confirmation Report Options; Isdn G4 Options - Oki OKIFAX 5700 User Manual

English

Message Confirmation Report Options

The Message Confirmation Report (MCF) is a very convenient feature
often used on a daily basis to ensure that faxes were sent or arrived at the
proper destinations. The following functions are for setting MCF
parameters.
MCF. (Single-Loc): Set in the ON state, a MCF will be printed out
automatically for single location transmissions. When set to OFF, no
report will be printed out. Speed access no. 70.
MCF. (Multi-Loc): Set in the ON state, single and miltiple location
transmission MCF's will be printed automatically. When set to OFF, no
report will be printed out. Speed access no. 71.
Image in MCF. : Set in the ON state, a portion of the first page of the fax
transmitted will be printed in the MCF. When set to OFF, no image will be
printed in the report. Speed access no. 72.
Err. Report (MCF.): Set in the ON state, an error report is automatically
printed if a fax communication does not end with the service code 0000
(indicates a successful transaction). When set to OFF, the report is not
printed out automatically. Speed access no. 73.

ISDN G4 Options

If the machine comes installed with an ISDN G4 board, the following
parameters must be set prior to beginning fax operations. Additionally, the
incorporation of the ISDN board also disables a number of the parameters
set for analogue operations (see comments with those parameters listed).
ISDN Dial Mode: This mode is for setting the default communication
method, either G4 or G3, when using the 10-key pad to dial. When set to
G4, communication will automatically take place at G4 if the remote
machine is G4 compatible. Speed access no. 27.
Speech Receive: Set to ON, this parameter enables the reception of voice
communications from the network. When set to OFF, all voice
communication signals are rejected automatically. Speed access no. 28.
ISDN Terminal ID (TID): ISDN TID requires the input of up to 3
numeric digits for the country code, 20 numeric digits for the ISDN
subscriber number, and 10 alphabetic characters for the ISDN ID
(subscriber code). Speed access no. 06.
Note:
At least one of these three items must be input for this parameter.
3-18 Chapter 3