General Set Up Screen
For general set up, press and hold the left arrow and right arrow_-]
[_
for 3 seconds. Follow the prompts
as outlined below,
L_
L_
NOTE: Date and Time were set at the factory
and stored
in the control
pane[
memory,
The Exercise Cycle was
also set at the factory,
The default
exercise
cycle occurs
on Tuesdays,
at 2:00
RM, Central
Standard
Time,
To updated
or change
these
settings,
follow
the steps be]ow,
@
Display will scroll last service code event, date, time, and
temperature
of when the event occured.
IF DURING PROGRAMMING NO BUTTONS ARE PRESSEDFOR 30 SECONDS,
THE CONTROL PANEL WILL AUTOMATICALLY EXIT THE PROGRAM MODE.
17