Feature Menus; Menu #1; Menu #2 - Avital AviStart 3200 Installation Manual

feature menus

Factory default settings are indicated in bold in the following feature tables.

menu #1

FEATURE DEFAULT - LED ON SETTING
NUMBER (PRESS CHANNEL 1)
1-1 Active arming
1-2 Chirps ON
1-3 Ignition controlled door locks ON
1-4 Active locking
1-5 0.8 second door lock pulses
1-6 Double pulse unlock OFF
1-7 Channel 2 output - Delayed validity (1)* Channel 2 output - Instant validity (2)/
1-8 Factory alarm disarm with Channel 2 ON
1-9 Stealth Code Hopping ON
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.

menu #2

FEATURE DEFAULT - LED ON SETTING
NUMBER (PRESS CHANNEL 1)
2-1 Engine checking ON
2-2 Tachometer checking type
2-3 12 minutes run time
2-4 Flashing parking light output
2-5 Cranking time 0.6 sec. (1)*
2-6 High voltage check level
2-7 Auxiliary output - factory alarm disarm Auxiliary output - special accessory
2-8 Normal status output
2-9 Anti-Grind ON
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.
34
LED OFF SETTING
(PRESS CHANNEL 2)
Passive arming
Chirps OFF
Ignition controlled door locks OFF
Passive locking
3.5 second door lock pulses
Double pulse unlock ON
latched (3)/latched reset with ignition (4)/
30-second timed (5)/second unlock (6)*
Factory alarm disarm with Channel 2 OFF
Stealth Code Hopping OFF
LED OFF SETTING
(PRESS CHANNEL 2)
Engine checking OFF
Voltage checking type
24 minutes, 60 minutes run time
Constant parking light output
Cranking time 0.8 (2), 1.0 (3), 1.2 (4), 1.4 (5),
1.6 (6), 1.8 (7), 2.0 (8), 4.0 (9) sec.*
Low voltage check level
Factory re-arm output
Anti-Grind OFF
© 2000 Directed Electronics, Inc. Vista, CA