Displaying The Entire Route - Alpine NVD-A121 SMART MAP PRO Owner's Manual

Displaying the entire route

The navigation system allows you to view the entire route so that you can verify the navigation
system's route calculation. If you select a cross-country route, for example Los Angeles to New
York, the navigation system will display the route at a special 256-mile magnification scale setting.
1
Press the MENU button to display the
main menu bar. Select Route and press
ENTER. The Arrange Route menu
appears. Select Display Entire Route
and press ENTER.
2
The entire route is displayed on a map
with a large enough view that you can
see the entire route.
Your current position, waypoints, and the destination icon
are displayed.
3 When you press the MP/RG button, the
system returns to the map screen.
With the route displayed, press and hold the
the remote control to zoom out until your desired wider
range route is obtained. When the button is kept pressed
and the widest range is reached, the system automatically
stops and displays the entire route.
Press the button. Each pressing zooms in the map by
^
increasing the magnification ratio one step.
Caution
COMPLY WITH THE CURRENT
TRAFFIC REGULATIONS WHILE
DRIVING
When using the navigation system,
always comply with the local traffic
regulations on the road while driving.
52
MENU
ENTER
/
ENTER
/
MP
/RG
^ button on