Set The Device To Access Point Mode; Using Access Point Mode - TRENDnet TEW-750DAP User Manual

TRENDnet User's Guide

Set the device to access point mode

Main > Device Mode
Note: By default, the device is set to function in access point mode.
1. Log into your access point management page (see
management page" on page 11).
2. Click on Main, click on Device Mode.
3. Click the Device Operation Mode drop-down list and select Access Point.
4. To save changes, click Save Settings.
Note: If you would like to discard the changes, click Don't Save Settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
"Access your access point

Using access point mode

Wireless > Basic
This section outlines available management options under basic wireless sub tab for
both 2.4GHz and 5GHz wireless sections.
1. Log into your access point management page (see
management page" on page 11).
2. Click on Wireless, click on Basic scroll down to Wireless Network Settings (2.4GHz or
5GHz)
3. Review the settings, click Save Settings when finished.
• Enable Wireless – Check the option to enable the wireless network/band or
uncheck to disable. Note: It is recommended to leave this setting checked.
o New Schedule – The schedule function allows you to define a schedule when the
wireless should be turned on. To define a new schedule, click New Schedule and
refer to page 45 Create Schedules. After you have created a new schedule, click
the drop-down list and the new schedule will be available for selection.
• Wireless Network Name (SSID): Enter the wireless name (SSID) for your wireless
network. This acronym stands for Service Set Identifier and is the name of your
wireless network. It differentiates your wireless network from others around you.
By default, the access point's wireless name is unique to the device. If you choose
to change the SSID, change it to a name that you can easily remember.
TEW-750DAP
"Access your access point
10