Closing The Server - Fujitsu PRIMERGY RX600 S5 Operating Manual

Opening/Closing the server
8.3.2

Closing the server

V
CAUTION!
The housing cover must be replaced as soon as possible for purposes of
cooling, to comply with EMC regulations (regulations regarding
electromagnetic compatibility) and to prevent fires.
Figure 52: Placing the housing cover
– Place the housing cover onto the server such that it projects approx. 2 cm at
the back (see circle in figure above).
– Push the housing cover as far as possible in the direction of the arrow.
– Fasten the little screw (see circle in
136
figure 51) on the cover.
Operating Manual
CSS components
RX600 S5