Added Drive Reported As Defective; Error Message On Screen - Fujitsu PRIMERGY RX600 S5 Operating Manual

Troubleshooting and tips
7.8

Added drive reported as defective

RAID controller is not configured for this drive
The drive was probably installed when the system was switched off.
Ê Reconfigure the RAID controller for the drive using the corresponding utility.
Information is provided in the documentation for the RAID controller.
or
Ê Remove and reinstall the drive while the system is switched ON.
If the hard disk drive continues to be shown as defective, then replace it (see
"Hot-plug HDD modules" on page
7.9

Error message on screen

The meaning of the error message is explained in the documentation for the
relevant components and programs on the ServerView Suite DVD 2.
RX600 S5
Added drive reported as defective
100).
Operating Manual 89