Identifying The Defective Css Component; Replacing A Non-Hot-Plug Expansion Card; Removing A Non-Hot-Plug Expansion Card - Fujitsu PRIMERGY RX600 S5 Operating Manual

Non-hot-plug components
8.2.1

Identifying the defective CSS component

Ê Open the server (see
Ê Press the Indicate CSS button on the system board (see Technical Manual
for the system board D2870 on the ServerView Suite DVD 2).
The PRIMERGY Diagnostic LED of the defective CSS component lights up
orange, thereby indicating which CSS component on the system board must
be replaced (see Technical Manual for details).
8.2.2

Replacing a non-hot-plug expansion card

8.2.2.1

Removing a non-hot-plug expansion card

Ê If necessary, remove all cables from the expansion card.
Ê Open the expansion card lock by lifting it up (see pos. #2 in
page 109).
The expansion card is now mechanically unlocked.
Ê Hold the removal tool by the green handle and pull it out of the PCI slot
together with the expansion card (see pos. #3 in
I
Do not pull on the expansion card itself.
122
"Opening/Closing the server" on page
Operating Manual
CSS components
134).
figure 28 on
figure 28 on page
RX600 S5
109).