Fujitsu PRIMERGY RX600 S5 Operating Manual page 111

CSS components
Removing engaging hooks
Figure 30: Removing engaging hooks from the removal tool
Ê Push the green engaging hooks down in the direction of the arrows (1) until
they disengage from the removal tool.
Ê Remove the engaging hooks (2) and keep them in a safe place.
Ê To insert a new expansion card, continue with section
expansion card" on page
V
CAUTION!
If you remove an expansion card and do not insert a replacement, you
will have to use a dummy module for better cooling, to comply with
applicable EMC regulations (regulations on electromagnetic
compatibility) and to protect against fire. Ensure that the dummy module
engages correctly in the slot.
RX600 S5
113.
Operating Manual
Hot-plug components
"Installing a hot-plug
111