Indicators On The Hot-Plug Power Supply Units - Fujitsu PRIMERGY RX600 S5 Operating Manual

Starting up and operation
4 LAN
link/transfer
(management
LAN)
5.1.2.4

Indicators on the hot-plug power supply units

Figure 18: Indicators on the power supply units
1 DC power
redundancy
indicator
2 PSU failure
and warnings
indicator
3 AC power
supply input
status
indicator
RX600 S5
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
Flashes green when LAN transfer takes place.
Lights up green when PSU is running.
Flashes green when PSU is in cold redundancy mode.
Lights up amber in case of a critical event (PSU
shutdown).
Flashes amber in case of a warning event (operation
continue).
Lights up green if AC power is present.
Flashes green if AC power is not present.
Operating Manual
Control elements and indicators
73