Advertisement
installation Example
Camera
a
Monitor
Attach with screws, using the five fixing
holes.
Rubber cap
(supplied)
Connecting cable
To protect it from water, apply self-fusing
tape (supplied) to the portion of the cable
which is in contact with the rubber cap.
Attaching the camera bracket to the camera
1 Using the four angle adjustment screws', the 4
mm washers', and the 3 mm Allen key", attach
the camera bracket* to the camera loosely
enough for adjustment.
*: supplied
Angle adjustment screws
2 Adjust the camera angle, then tighten the
screws.
4 mm washers
Advertisement
