Fujitsu ScanSnap fi-5110EOXM Operator's Manual page 97

2. Clean the following locations with a cloth moistened with cleaner F1.
Turn off the scanner before cleaning the following locations.
• Pad ASSY (x 1)
Remove the dirt on the rubber tabs by wiping downward. When cleaning the Pad ASSY,
take care to prevent the cloth from catching on to the metal parts.
• ADF glass surfaces (x 2 located on the ADF cover and the opposite side)
Wipe off the dirt gently.
• Pick roller (x 1)
Wipe clean the roller while turning it with your finger, be careful not to scratch the surface.
Take particular care in cleaning the Pick roller since black debris on the roller adversely
affect the pickup
performance.
• Plastic rollers (x 4)
Clean them lightly while rotating the rollers with your finger. Take care not to scratch the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris
on the rollers adversely affect the pickup performance.
6.3 Cleaning the Inside of the Scanner
Pad ASSY
Plastic roller
Glass
Eject roller
ScanSnap fi-5110EOXM Operator's Guide
Pick roller
Feed roller
6
81