End Of Operation - Fujitsu ScanSnap fi-5110EOXM Operator's Manual

■ End of Operation

Exiting "ScanSnap Manager"
Operation
Click and hold the "ScanSnap Manager" icon
the menu.
HINT
Disconnecting the scanner
Operation
1. Close the paper chute cover to turn off the scanner.
⇒
The "ScanSnap Manager" icon changes to
2. Disconnect the USB cable from your computer.
3. Disconnect the AC cable from the power outlet.
HINT
26
"ScanSnap Manager" is necessary for operating ScanSnap.
To start "ScanSnap Manager", from the Finder, select the installed destination
of ScanSnap (generally, "Applications" - "ScanSnap") - "ScanSnap Manager".
(*Generally, there is no need to exit "ScanSnap Manager".)
The power of the scanner is controlled by turning on/off the computer or
opening/closing the paper chute cover. In general you do not have to turn on/off
the scanner when it is connected to your computer.
on the Dock menu, and select "Quit" from
. The power lamp goes out.