Fujitsu ScanSnap fi-5110EOXM Operator's Manual page 15

CAUTION
The following describes important cautions described in this manual.
Do not install the scanner on unstable surfaces.
Install the scanner on a desk so that none of its parts protrude outside of the desktop.
Also, make sure that the scanner is installed on a flat, level surface.
Do not install the scanner on unstable surfaces. Install the scanner on a level surface that
is free of vibration to prevent it from falling.
Install the scanner on a strong surface that will support the weight of the scsanner and
other devices.
Firmly insert the power plug.
Firmly insert the power plug into the power outlet as far as it can go.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking the ventilation ports generates heat inside of
scanner, which may results in fire or scanner failure.
Do not place heavy objects or climb on top of the scanner.
Do not place heavy objects on the scanner or use the scanner's top surface for performing
other work. Improper installation might cause injuries.
Before moving the scanner, disconnect the power plug from the power
outlet.
Do not move the scanner with the power and interface cables connected as this might
damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power outlet,
and disconnect data cables. Also, make sure that the floor is free of obstructions.
ScanSnap fi-5110EOXM Operator's Guide
xiii