Fujitsu ScanSnap fi-5110EOXM Operator's Manual page 110

6. Remove the Pick roller from its shaft.
Pull out the shaft from the Pick roller while lifting up its tab.
ATTENTION
7. Attach the new Pick roller to the shaft.
Insert the new Pick roller aligning the protrusion with the slot on the Pick roller.
94
Tab
If you use your fingernail to pull up the picker roller tab, your fingernail may get
cracked or chipped. Instead you can use a clip to do that.
Protrusion
Shaft
Shaft
Pick roller
1
2
Pick roller