Fujitsu ScanSnap fi-5110EOXM Operator's Manual page 55

■ [Filename format...] button
Set the filename format for files to save the scanned images.
When you click the [File name format...] button, the following screen appears.
The following three settings can be specified.
1 "Use Operating System Setting."
Files are named according to the settings of the Operating System of your
computer.
2 "YYYYMMDDhhmmss"
Set the date and time for the file name when saving a scanned image to a file.
Example)
When the file is saved in PDF format at 19:00:50 on July, 27, 2004, the file
name will become:
3 "Custom File Name"
A file is named combining the text string entered at "File Name:" and a number of
digits specified at "Counter".
(An example of a file name is displayed at the bottom of the screen.)
About "Counter:"
HINT •
When there is no other file with the same name as the one specified at
"File Name:" in the save destination folder (specified on the [Save] tab),
the counter becomes 1 (001 in the case of three digits). From then on,
the counter is incremented by one upon saving a new file.
•
When there is a file with the same name in the save destination folder,
the counter becomes the smallest unused number.
Example) When the files Scan01.pdf, Scan03.pdf, Scan04.pdf exist in
the folder, and the scanned image is saved to a file that has the same
name from then on, the files are saved as Scan02.pdf, Scan05.pdf,
Scan06.pdf, Scan07.pdf and so forth.
•
When the specified number of digits is exceeded (for example, when
saving the 100th file when two digits are specified.), the number of
digits is incremented by one.
Clicking the [OK] button enables the settings.
(An example of the file name that you set is displayed under the [File name format...]
button.)
20040727190050.pdf
ScanSnap fi-5110EOXM Operator's Guide
3.4 Changing Scan Settings
3
39